HappyModel Mobula8 Micro FPV Drone: 1-2S 85mm Tiny Whoop with Caddx Ant FPV Camera X12 AIO Flight Controller ELRS Receiver 400mW FPV VTX EX1103 KV11000 Brushless Motor For adults FPV Racing

Are you tired of the power performance of the 1S whoop you own? Do you want more power to ripping and roaring in your backyard? Yes, here comes Mobula8, which is Happymodel’s first attempt on 85mm frame. It comes with X12 series flight controller, EX1103 KV11000 motor and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight.

FEATURES:

• X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
• VTX Power up to 400mw
• ELRS V3.0 ( ELRS Version)
• EX1103 KV110000 motors
• CaddxFPV Ant FPV camera
• Smooth and powerful
• Compatible for 1S-2S Lipo/LIHV battery
• 3D Printed Camera Lens Protector

SPECIFICATIONS:

Motor:

• Mode: EX1103 KV11000
• Configuration: 9N12P
• Stator Diameter: 11mm
• Stator Length: 3mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm
• Weight(g): 3.8g
• No. of Cells(Lipo): 1-2S

Propellers:

• Weight: 0.88g
• Material: PC
• Pitch: 2.3inch
• Props Diameter: 52.17mm
• Center Thickness: 5mm
• Center Hole Diameter: 1.5mm

Flight controller:

• X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
• X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
• X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
• X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: ICM20689 or ICM42688P(SPI connection)
• Mount hole size: 25.5mm*25.5mm
• Power supply: 1-2S battery input (DC 2.9V-8.7V)
• Built-in 12A(each) BLHeli_S 4in1 ESC
• Built-in Betaflight OSD(SPI Control)
• Built-in 5.8G OpenVTX 0mw~400mw
• Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
• Built-in voltage detection
• Built-in current sensor

Onboard 4in1 ESC:

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support BLHeliSuite programmable
• Firmware target: Z_H_30
• Default protocol: DSHOT300
• Support Bluejay firmware

Onboard SPI ExpressLRS 2.4GHz Receiver:

• Packet Rate option: 50Hz/150Hz/250Hz/500Hz
• ExpressLRS Firmware version: V2.0
• RF Frequency: 2.4GHz
• Antenna : SMD antenna
• Telemetry output Power: <12dBm
• Receiver protocol: SPI ExpressLRS
• Compatible with ExpressLRS V2.0 TX Module
• ExpressLRS firmware is updated Via Betaflight Firmware not ExpressLRS Configurator.
• To upgrade to ExpressLRS V3.0 update to Betaflight 4.4

Onboard 5.8g OPENVTX:

• F
• irmware version: OPENVTXS
• martAudio v2.1P
• IT Mode supportR
• CE Mode supportC
• hannels: 37chT
• ransmitting Power: 0/RCE/25mw/100mw/400mwP
• ower supply: DC 5VC
• urrent (5v): <650ma (400mw)

Caddx ANT 1200TVL Camera:

• Image Sensor: 1/3″ CMOS Sensor
• Horizontal Resolution: 1200 TVL
• TV System: NTSC or PAL
• IMAGE: 16:9 or 4:3
• Synchronization: Internal
• Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
• S/N Ratio : >52dB (AGC OFF)
• Video Output: CVBS
• Lens: 1.8mm
• Min. Illumination: 0.001Lux F1.2
• Auto Gain Control: YES
• WDR: Global WDR
• DNR: 3D DNR
• Dimensions: 14*14mm(with bracket to 19*19mm)
• Wide Power Input: DC 3.7-18V
• Weight: 2g (N.W.)

PACKAGE INCLUDES:

• 1 x Happymodel Mobula8 1-2S 85mm Analog Micro FPV Whoop Drone - ELRS Receiver
• 1 x Gemfan Hurricane 2023 tri-blade propellers (4CW 4CCW)
• 1 x Screw Driver
• 1 x Extra camera canopy